Search results

Features: Length 4 1/32 In, Application: Rigid Conduit, Imc, Standard: Ul 886, Csa C22.2, Nec, Size: 0.5in, Material: Copper Free Aluminum

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Grounding Bushing, 4 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 6 AWG - 250 MCM, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type RB Reducing Bushing, Size: 2-1/2 X 2 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type RB Reducing Bushing, Size: 2 X 1-1/4 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 7/8 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Group

Category: Iron Alloy Reducing Bushings

Cold Water Ground Clamp, 1-1/4 Inch to 2 Inch Pipe, Malleable

Category: U-Bolt Ground Clamps

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded NPT, Body Thick: 3/4 IN, 1 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet L

Category: Explosion-Proof Recessed Head Close-Up Plugs

Conduit Bushings, Threaded, 1-1/4 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

Reducing Washer, Steel, 2" x 1"

Category: Reducing Washers

Conduit Body With Cover and Gasket, Type LB, 1" Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LB Iron Conduit Bodies

OZ-Gedney Type IS Beam Clamp, Malleable Iron Clamp, Steel Screw, Hardened Case, 900 LB Maximum Load, 1-1/8 IN Maximum Jaw Opening, Finish: Clamp: Hot Dip Galvanized, Screw: Zinc Electroplated, Length: 2-5/8 IN, 1/2-13 Tapped Holes, 2-1/4 IN Height,

Category: Beam Clamps - Adjustable

OZ-Gedney Clip-On 170 Series Cover, 2 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA 00

Category: Steel Conduit Body Covers

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 2.19 IN Outside Diameter, 1.11 IN Inside Diameter, 1-1/4 X 3/4 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

OZ-Gedney Clip-On 170 Series Cover, 3/4 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA

Category: Steel Conduit Body Covers

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 3 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 3-1/4 IN Width, 2-1/8 IN Height, Third Party Cer

Category: Malleable Iron Liquidtight Flex Connectors

Liquidtight Connector, 90°, 1-1/2 Inch, Malleable Iron, Non-Insulated, For Use With Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, Applicable Standard Federal Specification WF-406E, NEMA; Application Hazardous Location; Environmental Condiotions Oil Tight

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Conduit Clamp, Size: 1 Inch, Right Angle, Material: Malleable Iron, Finish: Hot Dipped Galvanized, Mechanically Galvanized Hardware

Category: Malleable Iron EMT Right Angle Type K-Clamps