Search results

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 2.19 IN Outside Diameter, 1.37 IN Inside Diameter, 1-1/4 X 1 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3 IN Outside Diameter, 1.73 IN Inside Diameter, 2 X 1-1/4 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

Liquid Tight Straight Connector, Size 2 Inch, Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Zinc Electroplated, NEMA 4

Category: Malleable Iron Liquidtight Flex Connectors

Liquidtight Connector, 45°, 3/4 Inch, Non-Insulated, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type GH Swivel Ground Hub, Conductor Size: 4/0 AWG - 500 KCMIL, Length: 1-7/8 IN, Size: 1-1/4 IN, Cast Bronze, Screws: Brass, 2-11/16 IN Height, Dimension B: 2-1/2 IN, Dimension D: 3/8 IN, Third Party Certification: UL File Number E24264, Applicable Third Party Standards: UL 467, Federal Specification W-F-406E, For Use With Universal Ground Clamps To Connect Grounding Conductors Run Bare, In Armor Or In Conduit

Category: Ground Clamps With Hub

OZ-Gedney Type LBY 90 DEG Capped Conduit Short Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-3/8 IN, Trade Size: 3/4 IN, Connection: Tapered FNPT Hub, Third Party Certification: UL 34997, Hazardous Location: Class I, Division 1, 2, G

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 1/2 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Rigid Compression Couplings - Iron

Conduit Bushings, Threaded, 1 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

Sealing Fitting, Vertical, 3/4 Inch, Explosion-Proof, Malleable Iron With Zinc Finish

Category: Explosion-Proof Female Vertical Sealing Fittings

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 1-1/4 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 2-1/2 IN Width, 2 IN Height, Third Party Cer

Category: Malleable Iron Liquidtight Flex Connectors

Conduit Bushings, Threaded, 4 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

Reducing Washer, Steel, 1-1/2" x 1"

Category: Reducing Washers

OZ-Gedney Type RB Reducing Bushing, Size: 2 X 1 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 7/8 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups B,

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 3/4 IN, Steel, Connection: Threaded NPT, Body Thick: 1/2 IN, 1/2 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed For Hazardous

Category: Explosion-Proof Recessed Head Close-Up Plugs

Conduit Bushing, Insulating, 4 Inch, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Grounding Bushing, Insulated, Size: 3/4 Inch, Material: Malleable Iron, Lug: Aluminum, Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit, With Aluminum Lug, Outside Diameter: 1 7/16 Inch, Width: 1/2 Inch, Grounding Wire Size Minimum: 14 Wag

Category: Threaded Ground Bushings