Search results

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Conduit Body Cover, Type: FM7, Size: 1 1/2 inch, Material: PVC Coated Aluminum.

Category: PVC Coated Conduit Body Covers

"Plasti-Bond OE Series Conduit Outlet Boxes are installed in hazardous location conduit systems to serve as pulling and splicing fittings, to connect runs of conduit, to change the direction of a conduit run, or to provide access to conductors. They are provided with covers. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

1-1/4 Form 7 Cover

Category: PVC Coated Conduit Body Covers

Plasti-Bond LBY type elbows are used as service entrance elbows between service entrance and vertical weatherhead conduit runs, to change direction of a conduit run 90degree when space is limited, and for pull outlets. They are available for general service (Series LBY-50-GS through LBY-150-GS) and hazardous (Series LBY-50 through LBY-55) locations.

Category: PVC Coated Type LB Conduit Bodies

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LL Conduit Bodies

Conduit Body, Type: LR, FM8, Size: 3 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type LR Conduit Bodies

Conduit Body, Type: T, FM7, Size: 1/2 inch, Material: PVC Coated Aluminum. Includes: Cover & Gasket, Dimension A (Inches): 5.63 Dimension B (Inches): 1.79 Dimension C (Inches): 2.48 Dimension D (Inches): 0.94 Dimension E (Inches): 3.19

Category: PVC Coated Type T Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type C Conduit Bodies

ROB PRLBD9900 3-1/2 PULLING ELBOW LBD

Category: PVC Coated Type LB Conduit Bodies

ROB PRX29 3/4 AL MARK 9 X FITTING

Category: PVC Coated Type X Conduit Bodies

ROB PRLBD3300SA 1 AL PULLING ELBOW

Category: PVC Coated Type LB Conduit Bodies

Conduit Body, Type: LR, FM8, Size: 1/2 inch, Material: PVC Coated Iron. Includes: Cover & Gasket, Dimension A (Inches): 4.98 Dimension B (Inches): 1.48 Dimension C (Inches): 2.2 Dimension D (Inches): 1 Dimension E (Inches): 3.31 Nominal Weight (Pounds): 1.4

Category: PVC Coated Type LR Conduit Bodies

Conduit Body, Type: X, FM8, Size: 1-1/4 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type X Conduit Bodies

Conduit Body, Type: C, FM7, Size: 1 1/2 inch, Material: PVC Coated Aluminum. Includes: Cover & Gasket, Dimension A (Inches): 8.19 Dimension B (Inches): 2.6 Dimension C (Inches): 2.52 Dimension D (Inches): 1.94 Dimension E (Inches): 5.44

Category: PVC Coated Type C Conduit Bodies